|
Name: gg001
Sort: graphite gaskets
850 Series Graphite gaskets are cut from pure graphite sheet or graphite sheet with metal reinforcement, features excellent corrosion-resistance, high-and-low temperature resistance, good compression resilient and high internsity it can be used as sealing elements of pipe, valve, pump, pressure vessel, heat exchanger and condenser, etc. Other complex gaskets such as water gauge gasket and flange gasket with bolt holes are available.
850E Series, it is improved 61 series, wrapped with metallic stripe in the inner and outer circle borderline. Keep the former excellent performances. Can be installed and disassembled conveniently without damage.
Thickness : 1.5mm, 2.0mm, 3.0mm, 4.5mm
| Application |
Flanges, valve bonnets, heat exchangers, level indicatiors etc. |
| Typical Service Fluids |
High temperature & pressure steam, hot water, gases, heat midium, hydrocarbon, organic so;vents, acids, alkalis(PH0-14),LPG,LNG,liquefied oxgen, nitrogen and hydrogen etc. |
Details: See details
Detailed information pls visit: http://www.seal-product.com/graphite_gasket.htm |
|
Name: gg002
Sort: PTFE seals
Made from quality PTFE resin, powdered graphite, MoS2, high temperature-resistant Lubricants and glass fiber through press shaping and sintering.
Applications:
Sealing under ambient temperature up to 260°C
Supply rang:
Molded parts such as tubes, rods, "O" ring, gaskets, fillers and seats.
Details: See details
Detailed information pls visit: http://www.seal-product.com/ptfe_seals.htm |
|
Name: gg004
Sort: PTFE cushion gaskets
Material of Jacket |
Temperature
( ° C ) |
Pressure
( Mpa) |
Asbestos Joint Sheet |
150 |
1 |
Non-asbestos Joint Sheet |
200 |
2 |
Asbestos Joint Sheet between layers of Asbestos millboard |
220 |
2.5 |
Non-asbestos Joint Sheet between layers of Non-asbestos millboard |
220 |
2.5 |
Details: See details
Detailed information pls visit: http://www.seal-product.com/ptfe_cushion_gasket.htm |
|
Name: gg003
Sort: PTFE seal
A novel inner structure-purpose fibrous sealing materi made of PTFE resin through special process, low in density and creep, good in compression resilience, and easy in use and assembly.
Tmeperature: -200~280°C
Pressure: < 20 MPa
PH Value: 0~14
Used as seals for flanges, box connectors and valves
Supple rang:
Sheets: |
1500x1500mm |
Thickness: 0.5~60mm |
Gaskets: |
Diameter < 1500mm in various shape |
Joint Sealant: |
Width: 3~50mm |
Thickness: 2~8mm |
Ropes: |
Diameter: 3~25mm |
Details: See details
Detailed information pls visit: http://www.seal-product.com/ptfe_seals.htm |
|
|
Find More China Products and Hot China Products!!!
Best Products For YOU: Make Your Own Solar Panel, Wind Turbine and Save $$$. Free Tips Here...
Best Products For YOU: 
Best Products For YOU: 
